Do you need concrete for metal fence posts?

You can install a chain link fence without using concrete, but it is not recommended. Anchoring each fence post in concrete is the best way to ensure your fence will stand straight and tall for many years.

Can aluminum posts be set in concrete?

It also makes fine tuning your above ground post height much easier. Your aluminum fence panels and posts will be installed together and set in concrete at the same time. Before you begin mixing concrete, you will want to familiarize yourself with the different post types and set them by the post holes in your layout.

How do I keep my post level while concrete dries?

You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.

How do you protect aluminum from concrete?

Two coats of bituminous paint or zinc chromate primer are often used in severe applications to provide separation of the aluminum from the cement-based products. A light coating of petroleum jelly painted onto the surface of the frame is another way to provide temporary protection to the finish during construction.

What is the best way to dry set fence posts?

At Fence Supply Online we recommend dry setting your posts in concrete. It is the proven way to ensure your posts are safe and secure in the ground. Our experts will advise you on the dry setting process.

How do you install aluminum fence posts in a hole?

Keep the sides of the hole as straight as you can. It shouldn’t slope outward toward the top. Mix cement to the proper consistency according to the supplier’s instructions. Place your aluminum fence post in the hole and then fill the hole to a depth of about 16 inches with cement. Fill up the remainder of the space with excavated dirt.

How do you make a fence post out of concrete?

Set the post into the hole and attach 2×4 braces to adjacent sides of the post. Use a level to position the post perfectly vertical. Fill the hole with Fast-Setting Concrete up to 3 to 4 inches below ground level. Pour about a gallon of water per 50 lb bag into the hole and allow the water to saturate the concrete mix.

How deep should a fence post be in the ground?

The width of the hole should be about two to three times that of the post. Take out any rocks or roots which could affect how the post sits in the ground. A proper drain will take away any rainwater and keep the fence dry during its years of service. Line the bottom of the hole with pea gravel; a depth of about six inches will do.